Posted by Jessica Banks on June 15, 2008 | $ | 0 comments
ORDER OUT: Mcmaster Carr:
Etch wood grain on the foam. Remember this will decrease the side width and require the rabbit to be shortened. Also will need to make sure can etch on the edge of the other sides for continuity.
Posted by Jessica Banks on June 14, 2008 | connections | 0 comments
CONTACT: Sava Cable (973) 835-0882 :: Dave is kindly sending some threaded crimps.
Talked to Ron about making vented screws out
Initial idea about needing acrylic over the foam with thin material rivets over it to protect foam and spread force not necessary with the tnuts, which we tested with glue.
alex got into MIT!!! we do angle,
i do test
etch
glue in t nut use that vs acrylicc
Posted by Jessica Banks on June 12, 2008 | $ | 0 comments
ORDER_OUT: McMaster
8560K171 Clear Cast Acrylic Sheet .060” Thick, 12” X 12” 3 x $2.18 Each =$6.54
90186A211 Screwdriver-Installed Rivet Nut Zinc-Plt Stl, 6-32 Screw, 1/64”-3/16” Grip Range, Packs of 25 1 x $5.31 Pack
95868A154 Nylon Socket Head Cap Screw 6-32 Thread, 1” Length, Off-White, Packs of 100 (Same as 95868A304) 1 x $5.75 Pack
RSS feeds